Alpha Microsystems AM-649 Manuál s instrukcemi stáhnout pdf (Strana 14)

Installation Instructions: AM-650 1/4" Streaming Tape Drive Page 11

PDI-00650-00, Rev. A00

NYLON SHOULDER WASHERS

(HDW-10004-07)

FRONT BEZEL

METAL SUPPORT BRACKET

DWF-20260-00

AM-650 TAPE DRIVE

Figure 6 - Attaching to Front Bezel

7. Before you tighten the screw holding the tape drive to the metal support bracket, make sure you

are satisfied with the way the drive assembly is aligned with the cutout in your computer's front

bezel. Once the drive (or drives) are properly positioned, install the screw that holds the plastic

mounting base to the chassis bottom and tighten the screw holding the drive (or drives) to the

metal support bracket.

ATTACHING THE POWER AND INTERFACE CABLES

Once the AM-650 is mounted in the chassis, attach the power cable from the power supply to the four-

pin connector on the drive.

Attach the Wide SCSI cable to the 68-pin connector on the drive. The drive’s connector is keyed so the

cable can only be attached correctly.

If you are attaching the drive to a 50-pin narrow SCSI cable, you must use an adapter between the

50-pin cable and the 68-pin connector on the drive. This adapter is provided with the AM-650.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 22 23

Žádné komentáře

Alpha Microsystems AM-649 Manuál s instrukcemi Strana 14